Induction Annealing locknuts Class: HF Induction Annealing Intro: Objective To heat locknuts to 2150F (1176C) for annealingMaterial Waspaloy locknutTemperature 2150F (1176C)Frequency 382 kHzEquipment • UM-10AB-UHF induction heating system, equipped with a remote workhead containing one 0.66μF capacitor.• An induction …
Induction Annealing metal stamp sets Class: HF Induction Annealing Intro: Objective Heat the opposite end of a metal stamp so that it mushrooms instead of cracks/splits when struck by a hammer.Material S-7 steel of varying rectangular cross sectional sizesTemperature 1400-1800 F (760-982) CFrequency 204-165 kHzEquipment 25 kW,
Induction Annealing Saw blades Class: HF Induction Annealing Intro: Objective Anneal saw blades used for cutting bread, prior to hole punching.Material .38” (9.6mm) wide and .51” (12.9mm) wide continuous strips of 400 series stainless steel.Temperature 600C (315.6F) for one secondFrequency 229kHzEquipment • UM 6 kW …
Induction Annealing Tungsten Rods Class: HF Induction Annealing Intro: Objective To heat customer-supplied rods of various diameters (0.14 inch to 0.49 inch) to 4170F (2300C) at 2-4 feet per minuteMaterial Tungsten and Molybdenum; Tests are run in an atmosphere of Nitrogen or Hydrogen avoid oxidation of the materials.Tempera
Induction Annealing Titanium fasteners Class: HF Induction Annealing Intro: Objective Heating a titanium fastener to 1100-1450F (593-788C) for an annealing process.Material 0.06” (1.5mm) high zone on a titanium fastener measuring 0.163-0.375” (4.14-9.52mm) in diameter and 0.5-3.0” (12.7-76.2mm) in lengthTemperature 1100-1450F (…
Induction Annealing Brazing Wire Class: HF Induction Annealing Intro: Objective: Anneal a brazing wire for preform production.Material :Copper Nickel Silver 2774 Alloy rod 0.070″ (1.8mm) diameter.Temperature 650F(343.3C)Frequency 281 kHzEquipment • UM-06A-UHF induction heating system equipped with a remote workhead with on…
Induction Annealing Thread Ring Class: HF Induction Annealing Intro: Objective:To selectively and uniformly anneal two sections of a thread ring gage block from the hole to the outside surface from a hardness of Rc 59-61 to Rc 45. The gage blocks are made from O6 steel and range in size from 1″ to 8 1/2″ in diameter and r…
Annealing An Effective Heating Process Class: HF Induction Annealing Intro: There are different types of heat treatment procedures offered by various companies in the market. Few of them are widely applied and are extremely effective. One of the efficient heat treatment procedures is annealing. This process supports an entire ind
Induction Annealing Stainless Steel Class: HF Induction Annealing Intro: Induction Annealing stainless steel bread cutting saw bladesObjective: Anneal saw blades used for cutting bread, prior to hole punching.Material :.38” (9.6mm) wide and .51” (12.9mm) wide continuous strips of 400 series stainless steel.Temperature :600C (…
