Induction Annealing Titanium fasteners
Views Send Enquiry
Objective Heating a titanium fastener to 1100-1450ºF (593-788ºC) for an annealing process.
Material 0.06” (1.5mm) high zone on a titanium fastener measuring 0.163-0.375” (4.14-9.52mm) in diameter and 0.5-3.0” (12.7-76.2mm) in length
Temperature 1100-1450ºF (593-788ºC)
Frequency 125 kHz
Equipment • 25 kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor.
• An induction heating coil designed and developed specifically for this application.
Process A three turn concentrator plate coil is used to heat the fastener
for 0.2 seconds. This is an automated process that includes robotic placement of parts in the coil from a bowl fed track while Argon gas is flooded across the part to prevent oxidation.
The parts are processed at a rate of 1000 parts per minute.
Results/Benefits Induction heating provides:
• Can be incorporated easily with pick and place robotics.
• Flameless process.
• Heating is limited to the specific area
Material 0.06” (1.5mm) high zone on a titanium fastener measuring 0.163-0.375” (4.14-9.52mm) in diameter and 0.5-3.0” (12.7-76.2mm) in length
Temperature 1100-1450ºF (593-788ºC)
Frequency 125 kHz
Equipment • 25 kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor.
• An induction heating coil designed and developed specifically for this application.
Process A three turn concentrator plate coil is used to heat the fastener
for 0.2 seconds. This is an automated process that includes robotic placement of parts in the coil from a bowl fed track while Argon gas is flooded across the part to prevent oxidation.
The parts are processed at a rate of 1000 parts per minute.
Results/Benefits Induction heating provides:
• Can be incorporated easily with pick and place robotics.
• Flameless process.
• Heating is limited to the specific area
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction annealing for stainless pipe
induction annealing umbrella ribs by 60KW induction heater (UM-60AB-UHF)
induction annealing steel wire online
induction annealing steel umbrella ribs by 40KW induction heater (UM-40AB-HF)
induction annealing by horizontal type induction heater
induction annealing rod steel (steel bar)
induction annealing water channel
UHF induction annealing
Newest Comment
No Comment
Post Comment