Induction Annealing Brazing Wire
Views Send Enquiry
Objective: Anneal a brazing wire for preform production.
Material :Copper Nickel Silver 2774 Alloy rod 0.070″ (1.8mm) diameter.
Temperature 650ºF(343.3ºC)
Frequency 281 kHz
Equipment • UM-06A-UHF induction heating system equipped with a remote workhead with one 1.0 μF capacitor, and a 4-20mA input controller to aid in voltage ramping.
• An induction heating coil designed and developed specifically for this application.
Process A unique helical coil consisting of four consecutive coils connected in parallel with a quartz tube lining is used to heat the wire to 650ºF (343.3ºC) for annealing.
Results/Benefits Induction heating provides:
• Higher productivity of 27’ (8.2m) per minute
• Reduction in surface oxidation & scaling
• Consistent, repeatable results
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction annealing for stainless pipe
induction annealing umbrella ribs by 60KW induction heater (UM-60AB-UHF)
induction annealing steel wire online
induction annealing steel umbrella ribs by 40KW induction heater (UM-40AB-HF)
induction annealing by horizontal type induction heater
induction annealing rod steel (steel bar)
induction annealing water channel
UHF induction annealing
Newest Comment
No Comment
Post Comment