Induction Annealing Saw blades
Views Send Enquiry
Objective Anneal saw blades used for cutting bread, prior to hole punching.
Material .38” (9.6mm) wide and .51” (12.9mm) wide continuous strips of 400 series stainless steel.
Temperature 600°C (315.6°F) for one second
Frequency 229kHz
Equipment • UIHM 6 kW induction heating system equipped with a remote workhead containing one 1.00 μF capacitor.
• An induction heating coil designed and developed specifically for this application.
Process A three turn helical coil at a 45º angle is used to anneal a 1.2”
(30.5mm) strip of saw blade prior to hole punching.
Results/Benefits Induction heating provides:
• Improved quality of blades at hole punching location
• Decreased scrap product
• Easily incorporated into existing production lines
Annealing-Saw-blades
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction annealing for stainless pipe
induction annealing umbrella ribs by 60KW induction heater (UM-60AB-UHF)
induction annealing steel wire online
induction annealing steel umbrella ribs by 40KW induction heater (UM-40AB-HF)
induction annealing by horizontal type induction heater
induction annealing rod steel (steel bar)
induction annealing water channel
UHF induction annealing
Newest Comment
No Comment
Post Comment