Induction Tempering Spring
Views Send Enquiry
Objective Temper a spring by heating it to 300°C (570°F) in 2 – 4 seconds
Material Stainless steel AISI 302 springs- different length from 60 to
110 mm – outer diameters 8 mm.- wire diameter from 0.3 to 0.6 mm
Temperature 300°C (570°F)
Frequency 326 kHz
Equipment • Power of 6kW induction heating system
• remote workhead, two 0.33μF capacitors (total 0.66μF)
• multi-turn C-channel coil developed for this application
Process Springs are mounted on non-metallic mandrels to facilitate loading and unloading and are placed inside the coil (picture). Power is applied for 2 – 4 seconds, completing the tempering process. The C-channel distributes the heating evenly and enables the convenient staging and removal of the springs.
Results/Benefits Efficiency: Energy is applied directly to the springs only; surrounding air and fixturing are not heated.
Precision: temperature and duration of process are controlled Convenience: method integrates into a continuous process
Tempering Spring
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
install air-cooled clamp coil for preheating pipeline
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction vacuum coating with multi UM-DSP induction heater
induction coating by air cooled clamp induction coil
induction preheating D5000mm end ring for welding by 2 UM-DSP80A-HF at the same time
induction preheating D1219mm pipeline for welding by UM-DSB80AB-MF air cooled induction heater and i
induction preheating and heat treatment for 18Ton control valve of 600MW turbine
induction preheating and heat treatment after welding for 600MW turbine
Newest Comment
No Comment
Post Comment