Induction Heat the end of catalytic converter
Views Send Enquiry
Objective Heat the end of lorry catalytic converter exhaust system. The assembly must be held at target temperature for 200 hours, whilst the assembly is vibrated to test the weld strength.
Material Steel
Temperature 842 – 932 ºF (450-500 ºC)
Frequency 75 kHz
Equipment Power of 25 kW, induction heating system, equipped with a remote work head containing two 5 μF capacitors for a total of 10 μF and an induction heating coil designed and developed specifically for this application.
Process/Narrative A four-turn conical-shaped solenoid coil is used to heat the end of the exhaust system during the weld strength testing. It takes approximately 2 minutes to reach the target temperature between 842 – 932 ºF (450-500 ºC). This temperature is then held for 200 hours whilst the system is vibrated to simulate driving conditions. The weld is then inspected for cracks.
Results/Benefits Precision output of the power supply holds the desired temperature within a tight tolerance.
Heat the end of catalytic converter
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolts from turbine
induction debonding from steel rod
induction debonding rubber
Releasing Fixture by Induction Heating
Remove plastic coating from steel tubes by Induction Heating
Induction Heating catheter tipping die
Induction Molding for teflon catheter tip
induction melting for crystal growth
Newest Comment
No Comment
Post Comment