Induction Hermetically sealing glass
Views Send Enquiry
Objective Provide a hermetic seal of glass enclosed resistor to a lead
Material Resistor
Kovar rings, 0.1 inch (0.254cm) diameter
Glass tube slightly larger than 0.1 inch (0.254cm) diameter, 0.5 (1.27) inch length
Metal lead
Temperature 900 ºF (482) ºC
Frequency 324 kHz
Equipment • Power of 6kW induction heating system, equipped with a remote workhead containing two (2) 1.5 μF capacitors (for a total of 0.75 μF).
• An induction heating coil designed and developed specifically for this application.
Process A three turn concentrator plate coil is used to heat the Kovar ring for 500 milliseconds. This causes the glass to melt and seal one side of the resistor. The resistor is then turned over and the process is repeated to seal the other side using a second Kovar ring.
Results/Benefits Induction heating provides precise, consistent heat to very
small parts resulting in repeatable, quality seals.
By heating with medium frequency, arcing (which occurs at high frequencies) is avoided.
Hermetically sealing glass
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Newest Comment
No Comment
Post Comment