-
Keywords"in",total
3004 records
-
induction heat aluminum molds
Heat aluminum molds Objective Heat aluminum cake molds to release baked food productsMaterial Aluminum molds 4.5” (11.4 cm) diameterTemperature 302 F (150 C)Frequency 65 kHzEquipment Power of 70kW, induction heating system, equipped with a remote heat s…
-
induction heat pliers
Heat pliers Objective Heat pliers for final shaping of the handlesMaterial Steel pliers handles 5” (12.7 cm) long; 0.14” (3.56mm) thickTemperature 1200F (649 C)Frequency 199 kHzEquipment Power of 6kW induction heating system, equipped with a remote heat …
-
induction heat steel plates
Heat steel plates Objective Heat steel plates on conveyor system in order to cook Welsh cakes.Material Steel plate 760 x 440 x 10mm (29.9 x 17.3 x 0.4 in.)Temperature 200 C (392 F)Frequency 87 kHzEquipment Power of 100kW induction heating system, equipped …
-
induction heating engine head
Heating engine head Objective Heat steel liners on the head of an engine to remove aluminium casing. Material Steel, 80 mm ID x 190 mm (3.1 in x 7.5 in.) Temperature 650 C (1202 F) Frequency 81 kHz Equipment Power of 35kW induction heating system, …
-
induction heating aluminium susceptor
Heating aluminium susceptor Objective Expand powder into solid form for use in crash helmetsMaterial Microspheric powderAluminium chamber 110mm (4.3 in.) diameter x 35mm (1.3 in.) deep used to hold powderTemperature 150 oC (302 oF)Frequency 54.5 kHzProcess…
-
induction heating titanium blade
Heating Titanium Blade Objective Heat a titanium blade to 500F (200C) to melt and drain the wax from inside the blade.Material 4” length (101.6mm) titanium blades with 1.5” x 0.25” (38.1mm x 6.4mm) metering areaTemperature 500F (200C)Frequency 186 kHzEq…
-
induction heating engine valve
Heating Engine Valve Objective To heat the face of an engine valve head to 900F and maintain the temperature for an extended time, hightemperature stress test.Material Engine valve head (two sizes), temperature sensing paintTemperature 900 FFrequency 223 k…
-
induction pre-heating truck axle
Pre-heating Truck Axle Objective To pre-heat the seam of a truck axle to over 300F within 15 seconds for a welding application and maintain temperature within the welding zone for 15 seconds after the power isturned off.Material Steel truck axle; 350 and 4…
-
induction heating eight steel rods
Heating Eight Steel Rods Objective Heat eight steel rods simultaneously to 212F (100C) for a molding operation.Material 8 Steel Rods measuring 1/2 (12.7mm) in diameter and 14 (355.6mm) long held in place by 2.5” (63.5mm) diameter Teflon end plates.Tempera…
-
induction melting furnaces
Melting Furnaces Characteristics of cast iron to a large extent depend on the content of harmful impurities and, above all, of sulfur. For modifications to the high-strength nodular cast iron should have a low sulfur content. In cupola furnaces to smel…