Induction Heating Titanium Blade
Views Send Enquiry
Heating Titanium Blade
Objective Heat a titanium blade to 500°F (200°C) to melt and drain the wax from inside the blade.
Material 4” length (101.6mm) titanium blades with 1.5” x 0.25” (38.1mm x 6.4mm) metering area
Temperature 500°F (200°C)
Frequency 186 kHz
Equipment • Power of 10kW induction heating system equipped with a remote workhead.
• An induction heating coil designed and developed specifically for this application.
Process A specially designed eight-turn helical coil is used to heat to the blades. Power is applied for 3.5 minutes. The wax melts and drips out of the blade.
Results/Benefits Induction heating provides:
• Uniform and repeatable performance
• Faster application time
• Non-contact heating
Heating Titanium Blade
Good
Bad
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
Induction Heating multi wire bundles of rotor with different shape induction coils
induction heating bolt
induction heating steel rod by UM-40AB-HF
induction heating end of pipeline by 160kw induction heater
induction heating steel plates by auto feed system with 120KW induction heater
induction heating cambered work-piece by 160KW power supply
Induction heating for Plastic Reflow With Catheter Tubing
U shape induction coil for heating hole
Newest Comment
No Comment
Post Comment