Intro: 6 meters metal track induction heating treatmentapplications of (ultra) high frequency induction heat treatment

Intro: Radio Frequency induction heating 46cm steel pipe1Radio Frequency induction heating 46cm steel pipe

Intro: flat induction coil for surface heating treatmentflat induction coil for surface heating treatment

Intro: induction heat outer motorinduction heat outer motor by custom build inductorinduction heat outer trunk by 70KW power

Intro: induction treatment for axle

Intro: quick induction heating

Intro: custom built induction coil with magnetic ferrite for heating mould_3custom built induction coil with magnetic ferrite for heating mould_0

Intro: Heating Titanium Blade Objective Heat a titanium blade to 500F (200C) to melt and drain the wax from inside the blade.Material 4” length (101.6mm) titanium blades with 1.5” x 0.25” (38.1mm x 6.4mm) metering areaTemperature 500F (200C)Frequency 186 …

Intro: Heating steel mandrel tip Objective Heat a water-cooled steel mandrel to 700F (371C) to form a high quality Teflon catheter tip.Material Teflon catheter tubing, mandrel assemblyTemperature 600-700F (315-371C)Frequency 376 kHzEquipment • Power of 10kW…

Intro: Heating Catheter Tipping Die Objective: To heat an aluminum catheter tipping die to above 2850F within 2 to 5 seconds for the forming of catheter material. Presently, heating is performed in 15 seconds with older induction equipment. The customer woul…