Induction heating applications show 3

induction Heating is very popular for various of applications such as Annealing Bonding, Rubber/Metal Brazing , Cap Sealing ,Carbide Tipping, Catheter Tipping ,Crystal Pulling , Curing , Forging ,Getter Firing , Hardening , Heat Treating , Hot Forming ,Le…

Induction heating applications show 2

induction Heating is very popular for various of applications such as Annealing Bonding, Rubber/Metal Brazing , Cap Sealing ,Carbide Tipping, Catheter Tipping ,Crystal Pulling , Curing , Forging ,Getter Firing , Hardening , Heat Treating , Hot Forming ,Le…

Induction heating applications show 1

induction Heating is very popular for various of applications such as Annealing Bonding, Rubber/Metal Brazing , Cap Sealing ,Carbide Tipping, Catheter Tipping ,Crystal Pulling , Curing , Forging ,Getter Firing , Hardening , Heat Treating , Hot Forming ,Le…

base details of high frequency Induction heating

Introduction Induction heating is a non-contact heating process. It uses high frequency electricity to heat materials that are electrically conductive. Since it is non-contact, the heating process does not contaminate the material being heated. It…

Induction heating six wire bundles

Heating six wire bundles Objective Heating the ends of six wires on a starter motor to remove the electrical varnishesMaterial Starter motor with six wire bundles, each wire consists of 3wires 0.04” (1.0mm) diameter eachTemperature 1202 F (650 C)Frequency…

Induction heating nitinol spring

Heating Nitinol spring Objective To heat a nitinol spring assembly to 800F (426.6C) for shape setting applicationMaterial 0.018” (.457mm) Nitinol wire wrapped around a 0.08” (2.03mm) Nitinol mandrel 15” (381mm) longTemperature 800F (426.6C)Frequency 270…

Induction preheating oil drilling shaft

Preheating oil drilling shaft Objective To preheat a steel pipe to 500F (260C) before welding.Material Steel shaft assembly 5” to 8” OD (127-203.2mm) with a 2” (50.8mm) heat zone.Temperature 500F (260C), if higher temperatures are required, heat time ca…

Induction sintering copper powder

Sintering copper powder Objective Sintering copper powder to a stainless steel shaft Material Steel shaft & shell assembly, approx 2” (50.8mm) diameter, 2” (50.8mm) tall, copper powder Temperature 1600 F (871 C) Frequency 54 kHz Equipment • …

Induction heating motor

Heating motor Objective Heat steel to help bond an injection molded piece and help the reflow.Material Steel motor body, 60 x 60 x 27 (2.4 x 2.4 x 1.1) mm(in)Temperature 260C (500F)Frequency 237 kHzEquipment • Power of 20kW induction heating system, equip…

Induction heat braided cable

Heat braided cable Objective Prior to cutting, heat a short section of a hardened steel cable coated with a polyethylene sheathing.Material Multi-strand braided stainless steel cable 0.5 in. (1.27 cm) OD enclosed within a polyethylene sheathingTemperature …