Induction Soldering brass tubes
Views Send Enquiry
Objective: Soldering two brass tubes measuring 3/4″ and 1/4″ together for use as cellular phone antennas. The lengths of tubes range from four (4) feet to twelve (12) feet, and must be soldered along the axial side. The joint is to be made using 60/40 Tin Lead Solder and Kestor Rosin paste flux.
Material: Brass Tubes measuring 3/4″ and 1/4″ 60/40 Tin Lead Solder Kestor Rosin Flux
Temperature: 375°F
Application: Through the use of the the Power of 15KW,15kW output solid state induction power supply along with a unique five (5) turn 12″ long channel coil, the following results were achieved:
* 375°F was reached and the solder flowed after a heating period of 35 seconds.
* A production rate of 24″ per minute was determined to be adequate.
* A quality solder fillet was observed after heating and cooling
Equipment: Power of 15KW,15kW output solid state induction power supply including one (1) remote heat station containing two (2) capacitors, and a unique five (5) turn channel coil made from 3/16″ copper tubing and measuring 1 1/4″ by 12″.
Frequency: 75 kHz
Soldering brass tubes
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
UHF handheld induction heater for brazing copper
UHF handheld induction heater for brazing brass
handheld induction coil for soldering brass
handheld induction coil for brazing brass
induction brass soldering for refrigerator pipes
induction brass soldering with D80mm red copper with 60% silver solder paste
induction brass soldering pipes for chiller
induction brass soldering for multi pipes
Newest Comment
No Comment
Post Comment