Induction Brazing Copper Tube
Views Send Enquiry
Objective To braze a copper tube ( 3/8″ OD by 2-4″ long) into a 3/8″
fitting in less than 10 seconds. Heating must take place in a
channel type coil to allow for easy loading of parts.
Material Copper Tubing and Fitting with Braze and Stay Silv White Flux
Temperature 1300°F
Frequency 105 kHz
Equipment Power of 10 kW output solid state induction power supply equipped with a standard heat station containing eight 0.33 μF capacitors for a total of 0.66μF, a step down transformer, and a specifically designed induction heating coil.
Process Power of 10 kW solid state induction power supply was setup to achieve the following results:
· 2.0 kW of power was directly loaded into the copper tube resulting in a heating time of 7.2 seconds to reach the
necessary 13000F for brazing.
Results Processing ease was achieved through the design of a unique channel type coil comprised of three turns of 1/8″ copper
fitting in less than 10 seconds. Heating must take place in a
channel type coil to allow for easy loading of parts.
Material Copper Tubing and Fitting with Braze and Stay Silv White Flux
Temperature 1300°F
Frequency 105 kHz
Equipment Power of 10 kW output solid state induction power supply equipped with a standard heat station containing eight 0.33 μF capacitors for a total of 0.66μF, a step down transformer, and a specifically designed induction heating coil.
Process Power of 10 kW solid state induction power supply was setup to achieve the following results:
· 2.0 kW of power was directly loaded into the copper tube resulting in a heating time of 7.2 seconds to reach the
necessary 13000F for brazing.
Results Processing ease was achieved through the design of a unique channel type coil comprised of three turns of 1/8″ copper
brazing-coppeer
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Newest Comment
No Comment
Post Comment