Induction Annealing Steel Wire
Views Send Enquiry
Objective To heat 3” (76.2mm) from the end of the wire on a woven wire cloth 60” (1.52m) long. This prepares the wire mesh for bending in a press brake.
Material Woven wire cloth (steel) made of 1/2” (12.7) diameter wire, 60” (1.52m) long. Wires are 1.5” (38.1) apart
Temperature 1400 ºF (760 ºC)
Frequency 9.1 kHz
Equipment • 400kW induction heating system, equipped with a remote workhead containing three 25μF capacitors for a total of 75μF
• An induction heating coil designed and developed specifically for this application.
Process A two turn oval coil is used to heat the woven wire. The woven wire is placed in the coil and heated for 15 seconds to soften a 60” (1.52m) length of the wire 3” (76.2mm) deep. The woven wire is then placed in a press brake for the bending process.
Results/Benefits Induction heating provides:
• Faster production process
• High efficiency, low energy costs compared to gas furnace
• Fast, controllable process
• Hands-free heating that involves no operator skill for manufacturing
Material Woven wire cloth (steel) made of 1/2” (12.7) diameter wire, 60” (1.52m) long. Wires are 1.5” (38.1) apart
Temperature 1400 ºF (760 ºC)
Frequency 9.1 kHz
Equipment • 400kW induction heating system, equipped with a remote workhead containing three 25μF capacitors for a total of 75μF
• An induction heating coil designed and developed specifically for this application.
Process A two turn oval coil is used to heat the woven wire. The woven wire is placed in the coil and heated for 15 seconds to soften a 60” (1.52m) length of the wire 3” (76.2mm) deep. The woven wire is then placed in a press brake for the bending process.
Results/Benefits Induction heating provides:
• Faster production process
• High efficiency, low energy costs compared to gas furnace
• Fast, controllable process
• Hands-free heating that involves no operator skill for manufacturing
woven-wire-annealing
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction annealing for stainless pipe
induction annealing umbrella ribs by 60KW induction heater (UM-60AB-UHF)
induction annealing steel wire online
induction annealing steel umbrella ribs by 40KW induction heater (UM-40AB-HF)
induction annealing by horizontal type induction heater
induction annealing rod steel (steel bar)
induction annealing water channel
UHF induction annealing
Newest Comment
No Comment
Post Comment