Induction Annealing Motor Shaft
Views Send Enquiry
Objective Annealing the end of a steel hydraulic motor shaft prior to machining
Material .75” (19mm) diameter steel rod, 6” (152.4mm) long with a keyway at the end
Temperature 1350 ºF (732 ºC)
Frequency 359 kHz
Equipment • UM-06A-UHF induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor
• An induction heating coil designed and developed specifically for this application.
Process A three turn helical coil is used for annealing the motor shaft.
The end of the motor shaft is placed in the coil and power is applied for 20 seconds to reach 1350 ºF (732 ºC) and turn the steel red hot
Results/Benefits Induction heating provides:
• High efficiency, low energy cost
• Precise and controllable placement of heat to anneal only the required area
• Faster production process
• Consistent results
Material .75” (19mm) diameter steel rod, 6” (152.4mm) long with a keyway at the end
Temperature 1350 ºF (732 ºC)
Frequency 359 kHz
Equipment • UM-06A-UHF induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor
• An induction heating coil designed and developed specifically for this application.
Process A three turn helical coil is used for annealing the motor shaft.
The end of the motor shaft is placed in the coil and power is applied for 20 seconds to reach 1350 ºF (732 ºC) and turn the steel red hot
Results/Benefits Induction heating provides:
• High efficiency, low energy cost
• Precise and controllable placement of heat to anneal only the required area
• Faster production process
• Consistent results
annealing-motor-shaft
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction annealing for stainless pipe
induction annealing umbrella ribs by 60KW induction heater (UM-60AB-UHF)
induction annealing steel wire online
induction annealing steel umbrella ribs by 40KW induction heater (UM-40AB-HF)
induction annealing by horizontal type induction heater
induction annealing rod steel (steel bar)
induction annealing water channel
UHF induction annealing
Newest Comment
No Comment
Post Comment